Sassychat Team · 10 min read
How much to charge for custom videos on OnlyFans
Work out your custom video minimum from setup time, pick per-minute or flat-rate pricing, and price add-ons, resale discounts and deposits.

Yes. A $75 to $100 minimum price for custom videos is defensible. It sits inside the range creators quote publicly for customs, with examples above and below it, and the arithmetic further down is what justifies it rather than its popularity. Nobody publishes what creators actually charge, so treat any claim about a typical price, including this one, as a range and not an average. If you are working out how much to charge for custom videos on OnlyFans or Fansly, start with the minimum, not the per-minute rate. The floor has little to do with how long the clip runs. It pays for the hour of hair, makeup, cleaning and lights before you press record. The worry is whether a minimum will cost you income, set against custom requests that eat a ton of time and effort, and the arithmetic below answers it.
The range creators quote for customs
Creators price custom videos four ways: per minute, by minimum length, by flat floor and by add-on.
| Per-minute rate | Minimum length | Flat floor | Add-ons |
|---|---|---|---|
| $5/min, or $3/min if resale is allowed | None stated | None | Resale discount |
| $10/min | 3 minutes | $30 implied | Surcharge for name or no resale |
| $10/min easy non-kink, $12 to $15/min complex kink | 30 seconds at $10 or more | None | Price rises if props must be bought |
| $12/min normal, $18/min fetish | None stated | None | Name at $50 or more |
| $12/min | 10 minutes | $120 implied | None stated |
| None | None | $100 | Kink priced up |
| None | None | $150 | None stated |
| $100/min | None stated | None | None stated |
These are figures creators post in public creator forums. Nobody publishes the distribution, so the table shows the spread, not what is typical.
Read it this way. The per-minute number is only half of each structure, and the minimum sets the smallest order you will take. $10/min with a 3 minute minimum is a $30 floor. $12/min with a 10 minute minimum is a $120 floor. Against those, $75 to $100 sits in the middle-upper band, with company on both sides.
That also answers what a fair per-minute rate for custom content is, and whether yours is too cheap. There is no industry standard rate to check yourself against. A per-minute price is only too low or too high once you know the minimum it sits on and the setup time it has to cover.
Your floor is the setup hour, not the clip
This work happens whether the custom runs 30 seconds or 10 minutes:
- discussing the request
- hair and makeup
- cleaning and arranging the film space
- setting lights
- shooting
- editing
- sending it
- answering follow-ups
Setup time is fixed and clip length is variable, which is why a 1 minute custom at $10 can cost you the same hour as a 10 minute one.
Worked example. Every input in this post’s examples is invented for illustration. Swap in your own.
Say setup takes 1 hour, discussion plus editing and sending take 0.5 hours, and shooting takes about 1.5 times the clip length to allow for retakes, with a floor of 6 minutes, because even a one-minute clip needs the shot framed and a few takes. You decide $60 an hour is the least you will work for.
A 10 minute custom: 1 + 0.5 + 0.25 (15 minutes of shooting) = 1.75 hours. At $60, that is a $105 floor. Divide by a $12/min rate: 105 ÷ 12 = 8.75 minutes. Round up to a 10 minute minimum and the smallest order is $120, which clears it.
Now the easy $10 request for a 1 minute clip, if it needs the full setup: 1 + 0.5 + 0.1 (the 6 minute shooting floor) = 1.6 hours. $10 ÷ 1.6 = $6.25 an hour.
Setup moves the answer more than any other input, so here is what two floors pay per hour as setup changes, holding admin at 0.5 hours and shooting at 0.1 hours. Both columns are in dollars per hour.
| Your setup time | Hours per custom | $30 floor pays | $100 floor pays |
|---|---|---|---|
| None | 0.6 | $50.00/hr | $166.67/hr |
| 15 minutes | 0.85 | $35.29/hr | $117.65/hr |
| 30 minutes | 1.1 | $27.27/hr | $90.91/hr |
| 1 hour | 1.6 | $18.75/hr | $62.50/hr |
Find your row. If your setup really is an hour, a $30 floor pays less than a third of the $60 target, and $100 is roughly where it starts to clear.
Physical toll is a cost line too. Some acts hurt at 3 minutes: burning thighs, soreness, recovery time before the next shoot. Price strain the way you price setup. Add a per-minute tier for demanding acts, or decline them below a length and price that pays for the recovery.
The exception is a regular whose very simple repeat request needs no hair, no lights and no reset. That one can sit below your floor, because the setup cost really is absent. The top row of the table shows the same logic: with no setup, even a $30 floor pays $50 an hour.
What pushes the price up
List surcharges as named line items. Folding them into a vague higher rate hides them from the subscriber and from you.
Kink, mess and anything you haven’t done before
Give fetish or involved requests their own per-minute tier. Messy acts add cleanup to the setup hour. Something new adds planning, retakes and the risk that the first attempt is unusable.
Their name, props and exclusivity
- Name: An extra $20 to say their name, or more, is the floor of this line. A named clip cannot be resold, so price it at the resale value you lose.
- Props: Items you buy for the custom pass through at cost, plus your time to get them.
- Exclusivity: A no-resale request follows the same logic as the name. Charge for what you give up.
The first-minute premium for short customs
This is where custom video minimum length does its work. A 1 minute minimum or a 30 second clip still costs the full setup, so make the first minute carry it, with a 5 minute minimum or a flat floor. Example menu wording:
Customs: $12/min, 5 minute minimum ($60). Fetish $18/min. Your name +$25. No resale +$25. Props billed at cost. Paid before filming.
A line like that filters out time wasters before the DM starts.
What brings the price down: resale rights
Should you give a custom video discount for resale rights? Some creators charge less per minute if the buyer is OK with the video being sold on their page, for example $5 versus $3 a minute.
On a 5 minute custom, that discount costs $25 minus $15 = $10. Edit out any specifics, then sell the clip as PPV to the rest of your page at $15, excluding the original buyer from the mass message. One sale recovers the discount plus $5. Each later sale is margin, minus the editing time.
The discount only pays if you actually resell. A folder of customs you never sent out is money given away. Turning a custom into a later sale is ordinary PPV work, and a step-by-step method for selling PPV in conversation covers it. A buyer who wants his name used has already chosen the full-price, no-resale tier.
Per minute, flat rate, or per minute with a minimum

The per minute vs flat rate question for custom videos comes down to four things: time per dollar, how each structure filters time wasters, how easy it is to quote in a DM, and what happens when a request grows.
Per minute is easy to publish in a bio and scales with longer requests. With no minimum, it rewards short requests that still cost the full setup. Creators report starting at $5/min with a 3 minute minimum and finding it wasn’t worth their time, with customs dragging. Run the numbers: a $15 floor over the table’s 1.6 hours is $9.38 an hour.
A flat rate for a 10 minute video is simpler for the subscriber and protects the floor. You price by the request, so a request that grows needs a new quote.
The hybrid, per minute with a minimum plus a set price per extra minute, sets a floor and still scales. It is the structure to start from if you are unsure.
If you want to stop charging per minute entirely, quote totals. Talk the price through with the subscriber, open above your floor so you have room to give a regular a discount, and name the total before any add-ons. Example wording:
For what you’re describing, it’s $200. Your name adds $25. Payment comes first, and I’ll have it to you within three days.
If he counters, come down toward your floor and stop there.
Will a custom minimum limit your income?
Should you set a minimum for custom requests at all? Treat it as a question of capacity.
Raise the price if you have more customs than you can handle, if the backlog is crowding out sexting or PPV, or if you have started to hate doing customs.
You might be priced out if your quotes keep getting ghosted by subscribers who already buy your PPV. Ghosting from someone who has never bought anything is time-waster behavior, and that person vanishes at any price. A real price signal looks different: buyers counter, or pick a shorter length.
A tiered menu keeps the easy $10 requests without letting them eat your calendar. Offer a quickie custom, short and simple with no setup, at a set price, alongside a full-scale custom priced from setup time. On a couples page, both people’s setup time counts toward the floor.
Get paid first, and decide your redo policy before it comes up
Take payment before you make the custom, especially from new subscribers. For longer or more expensive orders, a custom deposit filters out time wasters before you spend the setup hour.
Anything the request didn’t specify is a new custom, not a free revision. If he wanted you fully naked and never said so, that is a second video. Example wording:
I filmed exactly what you asked for. Fully naked is a different video, so it’s a new custom at my usual rate. Happy to do it.
Put the policy in your menu or bio so he has seen it before he orders.
Before setting up deposits or prepayment, confirm these in the current help documentation and your own account settings:
- how a custom can be paid: locked message, tip or a request feature
- any minimum and maximum price on messages and tips
- what you may send a subscriber unprompted
- how refunds and chargebacks are handled
- whether custom requests have their own content rules
The answers differ between OnlyFans and Fansly. Where you cannot confirm a rule, assume the stricter reading.
Where you land, and when to move it
To set your own minimum price for custom videos:
- Time one full custom from setup to send.
- Multiply by the hourly figure you will accept. That is your floor.
- Pick a structure. The default is per minute with a minimum that clears the floor.
- Add named add-ons for name, kink, props and no resale, then a resale discount if you will actually resell.
If your floor lands at $75 to $100, it is a normal, defensible number, and the setup math is the justification you give yourself and the subscriber.
Revisit it when you are booked out (raise the price), when PPV buyers ghost your quotes (test a quickie tier), when resale clips sell (widen the resale discount), and when you raise your subscription price. One rule holds through all of it: no custom goes below what the setup hour costs you, unless there is no setup hour.



